Table of Contents
Advertisement
Getting the Settings Right
Power on, channel switching and input selection
After having determined the correct remote control codes for a device, the RC9800i will
now determine the most appropriate methods for powering on, switching channels and
selecting inputs on the device.
Note In the following paragraph, the example of a TV is discussed. Depending on the kind
of device you're configuring, some questions may be omitted.
Power on questions
Follow the on-screen instructions. The RC9800i will determine the best power on
method for the TV.
Channel switching questions
The RC9800i will now prompt you with questions to find the best method for tuning to
1, 2 and 3-digit channels. Follow the on-screen instructions.
Input selection questions
When the channel switching method is defined,
you will be asked a few questions about how
you select A/V inputs (i.e. audio-video sources
that feed audio-video signals into your
television), e.g. AV1, AV2, EXT1, EXT2, RGB or
YC2.
1 Use the
browse through the different input
selection options.
2 Choose Select this option when you have found the input selection method
that best matches the mechanism that your TV uses.
Note The sequence of screens discussed below depends on the option chosen.
For example, let's select option 2/7 'Using a single button, I cycle through inputs
until I reach the one I want'.
3 Choose Next.
4 Follow the on-screen instructions.
You will be asked to turn on the TV and to try the TV's input button.
5 Choose Next.
The following screen will appear:
User Manual
24
and
buttons to
Attention! Make sure that you carefully read all the options. Some options look very
similar, but differ considerably. Choose the input selection method that best matches
your situation.
Advertisement
Table of Contents
