RC9800i will take 30 minutes or longer, depending on the number of devices that you want to control with it. Package Contents The RC9800i Touch Screen Remote Control box contains the following items: RC9800i Cradle Power adapter USB cable...
Page 2
RC9800i (fig. 2). Select your location (fig. 3). Wireless operation Some functions of the RC9800i are only available when you use it in a wireless network (e.g. browse digital media files that reside on a PC in the wireless network).
To find your RC9800i’s MAC address, choose Change in the network setup screen, followed by Current Status. To add your RC9800i’s MAC address to the list of allowed MAC addresses, please see the User Manual of your Wireless Access Point.
Page 4
Note: If you have multiple devices of the same brand and type, we strongly advise you to fill out the model number. This way, the RC9800i will automatically copy all relevant device information when you add the next device of the same type, saving you setup time.
Some of these service-related settings are to be performed on a PC using a Web browser, NOT on the RC9800i. Please refer to p. 46-50 the User Manual for instructions on how to setup the EPG.
Page 6
In the next screen (fig. 2) you can choose activities (e.g. Watch TV, Watch DVD, …) by tapping the corresponding icon in the bottom bar. As the RC9800i has collected all relevant information during setup, the activity is fully automated: The RC9800i will turn on all devices involved, will select the correct inputs and will tune to the correct channels.