Hot-Swap Lfp Troubleshooting - Jaco One J1-10 Manual

Hot-Swap LFP Troubleshooting:

1) My Hot Swap Cart has no power, however Cart battery status LEDs in
both the front and back of the cart are working.
Check the inverter for the green light next to the AC outlet on the inverter.
Check all cable connections to and from the Inverter, ensure they are secure.
Remove the batteries from the Cart Carrier, replace with 2 fully charged batteries.
If there is power, the previous batteries need to be charged.
If there is still no power to the computer & LCD, contact JACO for replacement authorization or additional
troubleshooting direction.
2) The computer and LCD or laptop is integrated and working without issue
however the Mobile Cart battery status LEDs are not working in both the
front AND back of cart.
Remove and reinstall the same Power Blade Battery Packs that are currently in the Cart, if the LED's still do not
light, replace the batteries with 2 fully charged batteries.
If the status LED's, are still not showing, you will need to reset the controller unit.
To reset, insert a paper clip
into the reset port at the back
of the Cart as shown. Once
paper clip is inserted and the
internal button depressed, the
unit will beep signifying a
system reset. Remove the
paper clip and watch for the
status LED's to function.
If the status LEDs are still not functioning, contact JACO for replacement authorization or additional
troubleshooting direction.
26