Integrated Lfp Battery System - Jaco One J1-10 Manual

Integrated LFP Battery System

The JACO Battery Power Systems are designed specifically for the JACO Mobile Carts and include two different
power system options. The JPS250 is a one battery pack power system and the JPS500 integrates two battery
packs for extended run time. Both options are Lithium Iron Phosphate, also known as LiFePO4 or LFP.
When ordered with the JACO Mobile Cart, the LiFePO4 Battery systems are shipped fully integrated but will
need to be calibrated for proper power level status reporting, see the following pages for detailed instructions.
The JACO Power systems include two separate components, connected by a DC cable that runs through the Cart
Post. This cable connects the LiFePO4 battery packs, located in the Cart Base, to the Inverter/Charger assembly
which is located within the rear facing electronics enclosure as shown below.
Inverter/Charger assembly input & output connections are show below. Make sure that you only use JACO
approved devices and connections with the JACO Battery System
Left side view
1. AC Input
2. On/Off AC Outlet Switch
3 3
1 2
3. AC Outlet (2)
14