Field Description - KVH Industries TracVision M7 Replacement Instructions Manual

TracVision M7
Main PCB Replacement Instructions
6
m. Type the following GPS command then press Enter.
GPS,XX,D,YYY,Z
Field Description
XX Your latitude (0-90)
D S (South) or N (North)
YYY Your longitude (0-180)
Z E (East) or W (West)
The antenna will use this data to speed up satellite acquisition.
You can find your latitude and longitude from one of the
following sources:
• GPS (Global Positioning System)
Figure 5 on page 7
•
grids and tables, providing you with approximate latitude and
longitude values for North America and Europe.
n. Follow the instructions provided in the TracVision M7
User's Guide to set up the TracVision system to track
your selected satellites.
o. Type ZAP then press Enter. The antenna will restart.
Wait one minute for system startup.
Figure 6 on page 8
and contain position