KVH Industries TracVision M7 Replacement Instructions Manual page 5

Step 2 - Configure the Antenna
The antenna now needs to be configured. The following instructions
explain how to configure the antenna. This procedure requires a PC
with the latest version of the KVH Flash Update Wizard installed.
a. Follow the instructions provided in the TracVision M7
User's Guide to connect a PC to the TracVision system.
b. Double-click the KVH Flash Update Wizard shortcut on
your PC's desktop to start the Flash Update Wizard.
TIP: You do not need to flash the antenna; you will simply type
commands in the Flash Update Wizard's "TracVision Antenna
Comms" window. Be sure to click the "TracVision Antenna Comms"
window to select it before typing.
c. Type HALT then press Enter.
d. Type DEBUGON then press Enter.
e. Type =TVM7 then press Enter.
f. The antenna will restart. Wait one minute for system
startup.
g. Type HALT then press Enter.
h. Type DEBUGON then press Enter.
i. Type =LSTEST then press Enter
j. Type =CALGYRO then press Enter. If a "Scale factor
out of range - bad gyro" message appears, contact KVH
Technical Support.
k. The antenna will restart. Wait one minute for system
startup.
l. Type HALT then press Enter.
TracVision M7
Main PCB Replacement Instructions
5