KVH Industries TracVision M7 Replacement Instructions Manual page 13

Flash the RF PCB
a. Connect the DB9 end of the flash adapter cable to your
PC.
b. Connect the stereo plug end of the flash adapter cable
to the RF port on top of the MCP.
Figure 11 RF Port on Top of MCP
RF Port
c. Follow the Flash Update Wizard's onscreen
instructions to flash the RF board.
The procedure is complete! Be sure to return the faulty main PCB to
KVH.
NOTE: Before returning the main PCB, be sure to obtain an RMA number
from KVH Technical Support and write the number clearly on the outside of
the box. Shipments received without an RMA number will be returned to you
at your expense.
TracVision M7
Main PCB Replacement Instructions
13