Chapter 5
Operation
Chapter 5 : Operation
5.1 Start up the Step Down Transformer (TFM-RT)
The input of the TFM-RT must be connected to the output of the power supply. The
equipment must be plugged into the output receptacles on the TFM-RT.
1. Turn on all of the Load breakers on the rear panel of the TFM-RT.
2. Turn on the connected equipment one at a time.
5.2 Turn off the Step Down Transformer (TFM-RT)
1. Turn off all of the connected equipment.
2. Turn off all of the Load breakers on the rear panel of the TFM-RT.
1 6