Care And Cleaning - Whirlpool ACM313/BA Health & Safety, Use & Care And Installation Manual

CARE AND CLEANING

What?
Everyday soiling
on glass
(fingerprints,
marks, stains left
by food or non-
sugary spillovers
on the glass)
Boil overs,
melts, and
hot sugary
spills on the
glass
Spillovers on
t h e t ou c h
c on t r ol s
How?
1. Switch off the hob.
2. Apply a hob or glass
cleaner while the glass is
still warm (but not hot!)
3. Rinse and wipe dry with a
clean cloth or paper towel.
Remove it immediately
with a razor blade scraper
suitable for induction glass,
but beware of hot cooking
zone surfaces:
1. Switch off the hob.
2. Hold the blade or utensil
at a 30° angle and scrape the
soiling or spill to a cool area
of the hob.
3. Clean the soiling or spill
up with a dish cloth or
paper towel.
4. Follow steps 2 to 4 for
'Everyday soiling on glass'
above.
1. Switch the power to the
hob off.
2. Soak up the spill
3. Wipe the touch control
area with a clean damp
sponge or cloth.
4. Wipe the area
completely dry with a
paper towel.
•
When the hob's power is
switched off, the residual heat
indicator will not work but the
cooking zone may still be hot!
Take extreme care.

Do not use abrasive sponges or
scouring pads. Their use could
eventually ruin the glass.

After each use, clean the hob
(when it is cool) to remove
any deposits and stains due to
food residuals

Sugar or foods with high sugar
content damage the hob and
must be immediately removed.

Salt, sugar and sand could
scratch the glass surface.

Use a soft cloth, absorbent
kitchen paper or a specific hob
cleaner (follow the
Manufacturer's instructions).

Remove stains left by melts
and sugary food or spillovers as
soon as possible. It left to cool
on the glass, they may be
difficult to remove or even
permanently damage the glass
surface.

Cut hazard: when the safety
cover is retracted, the blade in
a scraper is razor-sharp. Use
with extreme care and always
store safety and out of reach of
children.

The hob may beep and turn off
by itself, and the touch
controls may not function
while there is liquid on it.

Make sure you wipe the touch
control area dry before turning
the hob back on.
14
Important!