Whirlpool ACM313/BA Health & Safety, Use & Care And Installation Manual page 13

4. When the time is set, it will begin to count down.
The display will show the remaining time and timer
indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will turn on indicating that zone is selected.
5. To cancel the timer, touch the heating zone selection control, and then touch
the " Timer ", and the " -- " will show in the minute display, or " H " will show in
the minute display and then show " -- "
6. When cooking time expires, the corresponding
cooking zone will switch off automatically. Buzzer
will beep once and the timer indicator shows " -- "
Other cooking zone will keep operating if they are turned on
previously.
C. Setting The Timer To Turn More Than ONE Cooking Zone OFF
1. The timer indicator will show the shortest time if using this function (e.g.
zone no.1 was set to be turned off in 6 minutes and zone no. 2 was set to be
turned off in 3 minutes, the timer will show" 3 ".)
NOTE: The red dot next to the power level indicator flashes indicate it is
showing cooking time of the heating zone.
(Set to 6 minutes)
(Set to 3 minutes)
12