Table of Contents
Advertisement
Available languages
Available languages
MAINTENANCE AND CLEANING
Disconnect the appliance from the power supply.
•
Do not use steam cleaning equipment.
•
Do not use abrasive sponges or scouring pads as they may damage
the glass.
•
After each use, clean the hob (when it is cool) to remove any
deposits and stains from food residue.
•
Sugar or foods with high sugar content can damage the hob and
must be immediately removed.
TROUBLESHOOTING
If the hob does not operate correctly, before calling the After-Sales
Service, refer to the Troubleshooting Guide to determine the problem.
•
Rear and follow the instructions given in the section "Daily use".
•
Check that the electricity supply has not been shut off.
•
Dry the hob thoroughly after cleaning it.
Possible error codes displayed on all the displays alternately flashing (F
then for example 1). The following are possible causes and resolutions:
F0
= interface error -> if the error has appeared, disconnect the power
supply and reconnect, if the error persists contact the service
F1
= single key error -> clean the key surface, if the error persists
contact the service
F2= Key error -> clean the surface of the keys, if the error persists
contact the service
F3/F4
= temperature sensor error -> the error should disappear when a
safe value returns, if the error persists contact the service
F5=Interface error -> The error should disappear when a safe value
returns, if the error persists contact the service.
F6
= Hot touch control error -> The error should disappear when a safe
value returns, if the error persists contact the service.
AFTER-SALES SERVICE
In order to receive complete assistance, please register your product on
https://docs.ariston.eu/register.
BEFORE CALLING THE AFTER SALES SERVICE:
1.
See if you can solve the problem by yourself with the help of the
TROUBLESHOOTING suggestions.
2.
Switch the appliance off and back on again to see if the fault
persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN
TOUCH WITH THE NEAREST AFTER SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet
or follow the website's instructions on
When contacting our Client After-sales service, always specify:
•
a brief description of the fault;
•
the type and exact model of the appliance;
https://docs.ariston.eu/
•
Salt, sugar and sand could scratch the glass surface.
•
Use a soft cloth, absorbent kitchen paper or a speci hob cleaner
(follow the Manufacturer's instructions).
•
Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
•
After cleaning the hob, dry thoroughly.
Fc/FT/FE
= Temperature sensor error -> Wait for the temperature to
drop, if the error persists contact the service.
FC
= Sensor error -> The auto check removes the error when a safe
value returns, if the error persists contact the service.
Fr
= Relay error -> Some relays have problems, power off for 1 minute
and reconnect, if the error persists contact the service.
FH
= Eprom error
HEATING ELEMENTS
V
Type-Type
single-circuit radiant
single-circuit radiant
double-circuit radiant
triple-circuit radiant
•
the serial number (number after word SN on the rating plate
located under the appliance). The serial number is also indicated in
the documentation;
•
your full address;
•
your telephone number.
If any repairs are required, please contact an authorized after-sales
service (to guarantee that original spare parts will be used and repairs
carried out correctly). (follow the Manufacturer's instructions).
Ø 157.5
Ø 193.5
Ø 131.5/224.5
2100-700
Ø 292.5-218-153 2400-750-750
400011589784
EN
W
1200
1700
Advertisement
Table of Contents
