Using Your Induction Hob - Whirlpool ACM313/BA Health & Safety, Use & Care And Installation Manual

- Make sure that the base of your pan is smooth, sits flat against the glass, and is
the same size as the cooking zone or at least cover 80% of the cooking zone. Use
pans whose diameter is as large as the graphic of the zone selected. Using a pot a
slightly wider energy will be used at its maximum efficiency. If you use smaller
pot efficiency could be less than expected. Pot less than 140 mm could be
undetected by the hob. Always centre your pan on the cooking zone.
- Always lift pans off the Induction hob – do not slide, or they may scratch the
glass.

USING YOUR INDUCTION HOB

To Start Cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show " - ",
indicating that the induction hob is at standby mode.
2. Place a suitable pan on the cooking zone.
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3. Touch the heating zone selection control, it will
show next to the key and flash.
6