Error State - IBM SAS RAID Series Manual

possible values for this field are:
Table 7. Battery state
No battery warning/error
No warning or error
condition currently exists.
Power-on time (days)
Indicates the raw power-on time, in units of days, of the rechargeable cache battery pack.
Adjusted power-on time (days)
Indicates the adjusted (prorated) power-on time, in units of days, of the rechargeable cache
battery pack.
Note: Some rechargeable cache battery packs are negatively affected by higher temperatures and
thus are prorated based on the amount of time that they spend at various ambient temperatures.
Estimated time to warning (days)
Estimated time, in units of days, until a message is issued indicating that the replacement of the
rechargeable cache battery pack should be scheduled.
Estimated time to error (days)
Estimated time, in units of days, until an error is reported indicating that the rechargeable cache
battery pack must be replaced.
Concurrently maintainable battery pack
Indicates if the rechargeable cache battery pack can be replaced while the controller continues to
operate.
Battery pack can be safely replaced
Indicates if the controller's write cache has been disabled and the rechargeable cache battery pack
can be safely replaced.

Error state

The cache battery pack should be in an error state before you replace it.
To prevent possible data loss, ensure that the cache battery pack is in an error state before replacing it.
This will ensure all cache data is written to disk before battery replacement. Forcing the battery error will
result in the following:
v The system logs an error.
v Data caching becomes disabled on the selected controller.
v System performance could become significantly degraded until the cache battery pack is replaced and
charging of the new battery pack has completed. The new battery pack may take several hours to
charge.
v The battery pack can be safely replaced field on the controller rechargeable battery information screen
indicates Yes.
v Cache data present LED stops flashing. See the feature descriptions and the figures in the Replacing a
battery pack section to determine if your adapter has a cache data present LED and the location of the
LED.
This error state requires replacement of the cache battery. Ensure that you have the correct type and
quantity of cache battery packs to do the replacement. To resume normal operations, replace the cache
battery pack.
Warning condition
A warning condition
currently exists and an
error has been logged.
Error condition
An error condition
currently exists and an
error has been logged.
Chapter 6. SAS RAID controller maintenance
Unknown
Information is not available
to determine whether a
warning or error condition
currently exists.
33