rd
3 Service Instructions to the servicing Dealer
(Note: Refer the Maintenance schedule chart for more details)
•
Replace engine oil.
•
Clean engine oil strainer.
•
Inspect and adjust (if required) the valve clearance.
•
Inspect and clean drive belt, sliding shoes and rollers, clutch housing and shoes.
•
Clean air filter.
•
Inspect and adjust (if required) the carburetor.
•
Inspect and adjust (if required) idle speed & CO%. Air screw position.
•
Inspect throttle and choke response.
•
Inspect fuel filter.
•
Inspect steering movement.
•
Inspect and adjust (if required) brake lever free play adjustment.
•
Inspect brake shoe wear.
•
Inspect and charge (if required) battery.
•
Inspect front and rear suspension.
•
Inspect tyre pressure and wear.
•
Check all lights, horn and switch operations.
•
Wash and clean the scooter.
•
Inspect low beam setting adjustment.
•
Check brake pad and brake disc for wear.
•
Inspect and top up (if required) brake fluid.
•
Check with diagnostic tool if there are any errors & parameters are correct.
•
Grease application in correspondence of the muff with rear brake lever and
of the CBS device.
**Any Jobs, other than listed above will be carried out on chargeable basis
118
rd
3 Service Instructions to the servicing Dealer
(Note: Refer the Maintenance schedule chart for more details)
• Replace engine oil.
• Clean engine oil strainer.
• Inspect and adjust (if required) the valve clearance.
• Inspect and clean drive belt, sliding shoes and rollers,
clutch housing and shoes.
• Clean air filter.
• Inspect and adjust (if required) the carburetor.
• Inspect and adjust (if required) idle speed & CO%.
Air screw position.
• Inspect throttle and choke response.
• Inspect fuel filter.
• Inspect steering movement.
• Inspect and adjust (if required) brake lever free play
adjustment.
• Inspect brake shoe wear.
• Inspect and charge (if required) battery.
• Inspect front and rear suspension.
• Inspect tyre pressure and wear.
• Check all lights, horn and switch operations.
• Inspect low beam setting adjustment.
• Wash and clean the scooter.
• Check brake pad and brake disc for wear.
• Inspect and top up (if required) brake fluid.
• Check with diagnostic tool if there are any errors
& parameters are correct.
• Grease application in correspondence of the
muff with rear brake lever and of the CBS device.
**Any Jobs, other than listed above will be carried out on chargeable basis