Access Control - TP-Link Archer C7 User Manual

Chapter 12
5 If you want to ignore the ping packets from the WAN port, select
From WAN Port; if you want to ignore the ping packets form the LAN port, select
Ignore Ping Packet From LAN
6 Click Save.
12 2

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to Advanced
3 Enable Access Control.
4 Select the access mode to either block (recommended) or allow the device(s) in the
list.
• To block specific device(s)
1 ) Select Blacklist and click Save.
2 ) Select the device(s) to be blocked in the
Port.
> Security > Access Control.
Online Devices table by ticking the box.
Network Security
Ignore Ping Packet
58