Ip & Mac Binding - TP-Link Archer C7 User Manual

Chapter 12
3 ) Click Block above the
Devices in Blacklist
• To allow specific device(s)
1 ) Select Whitelist and click Save.
2 ) Click Add in the
Address (You can copy and paste the information from the
device is connected to your network).
3 ) Click OK.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the Blacklist
12 3 IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device's IP address to its MAC address. This will prevent ARP Spoofing and
other ARP attacks by denying network access to an device with matching IP address in
the Binding list, but unrecognized MAC address.
Online Devices
automatically.
Devices in Whitelist
or Whitelist.
table. The selected devices will be added to
section. Enter the
Network Security
Device Name and MAC
Online Devices list if the
59