Fujitsu PRIMERGY PG-R6RC1 User Manual page 58

6
Attach mounting fixtures for lower to the base rack and connect
the extension rack.
Secure each fixture with two bolts, attaching the bolts to the same positions used for the
stabilizer bolts. Attach mounting fixtures to the two positions at the the front and rear of the
base rack and extension rack connection sides.
Front side
mounting fixtures
for lower
Hexagon head
bolt (M8)
Rear side
58
The upper mounting fixture is wider, and its holes are bigger than the lower
mounting fixture. Do NOT mix up the upper and lower ones.
Before attaching the mounting fixtures, push the bottom of the racks
together and equalize the space between the rack pillars from the top to
bottom.
Plain washer (M8)
Spring washer (M8)
Spring washer (M8)
Mounting fixtures
for lower
Hexagon head bolt
(M8)
Plain washer (M8)