Fujitsu PRIMERGY PG-R6RC1 User Manual page 57

4
Align the height of the extension rack to that of the base rack.
Line up the side of the extension rack with the side of the base rack and move the feet of the
extension rack up and down to adjust the height to the base rack.
5
Attach mounting fixtures for upper to the base rack and connect
the extension rack.
Secure each fixture with two bolts, attaching the bolts to the same positions used for the top
cover screws. Attach mounting fixtures to the two positions at the the front and rear of the
base rack and extension rack connection sides.
Base rack
Extension rack
Hexagon head bolt (M12)
Spring washer (M12)
mounting fixtures for upper
Plain washer (M12)
2 Standard Rack (40U/24U)
E
57