Omron EQUO Series User Manual page 78

(ZN-PD-S) by LAN cable to log the particle count value and differential pressure data to the
SD memory card simultaneously.
*3 Automatically writes data into the SD memory card when the internal memory reaches the upper
limit, and continues recording until the SD memory card will reach the capacity limit. If the SD
memory card is not inserted when the internal memory reaches the upper limit, recording ends.
(Data can be output to the SD memory card by pressing the button after inserting the SD
memory card.)
*4 A mode to record the latest measurement value for the maximum capacity of the internal
memory at all times. (when reaching the upper limit of the internal memory, data item will be
discarded from the oldest.)
*5 Output when the value exceeds the upper limit that has been set in threshold value setting mode,
or falls short of the lower limit.
*6 Except for Air Particle Sensor connection mode.
*7 When using third party SD memory card, please use industrial SD memory card (flash memory
is SLC type) with high reliability and durability. Available SD memory card is SD standard or
SDHC standard, Class 4 or higher, (SDXC standard cannot be used) You must confirm the
operation of third party SD memory card yourself.
*8 Nickel metal hydride batteries or alkaline batteries can be used. Manganese batteries cannot be
used.
*9 The battery life varies according to measurement environment, sampling, measurement
operation mode, battery's type and performance.
*10 In case using Mounting Magnet ZN9-EM01-S (sold separately), install the product in a location
where impact is not applied.
Vibration resistance is 10 to 50 Hz, double amplitude 0.3 mm, acceleration 20 m/s
each in X, Y and Z directions.
*11 The attached connector is XW4B-02B1-H1.
7-2
Appendix
2
, 50 min for