A/C And Heater Faults - Ford 1833 Series User Manual

OPERATION
A/C and Heater
In the event of a fault the followıng dısplays are possıble
DISPLAY
Automatic detection is active.
The EasyStart Timer has been discon-
nected from The power supply and then
reconnected.
4
No communication.
1st heater fault.
2nd heater fault.
Voltage too low.
Temperature sensor is defective
DESCRIPTION
"Wait until the automatic detection has
finished, then set the time and weekday.
"Check and if necessary renew the heater fuse.
Visit your vehicle workshop.
Visit your vehicle workshop.
Visit your vehicle workshop.
Charge battery, if necessary visit your vehicle workshop.
Visit your vehicle workshop.
REMEDY / CUSTOMER
88