Returning The Cab To Driving Position - Ford 1833 Series User Manual

Returning the cab to driving position:

a) Lower the latch on the cab tilt cylinder up.
b) Using the wheel brace provided in the
toolbox of your vehicle rotate the hexagonal
head bolt on the cylinder.
MAINTENANCE AND SERVICE
c) If the warning is illuminated on the
display when you get in the vehicle, this means
that cab is not locked correctly. Check it.
CAUTION
Fully open and close the latch on the cab
tilt cylinder while you are tilting and bringing
the cab back to driving position, respectively.
Do not tilt the cab or bring it back to driving
position while the latch is in half-open or half-
closed position.
Otherwise, you may cause faults in the cab tilt
cylinder.
173
Driver Cab
5