Manual Roof Flap
Switching on: Push the cover up by tightly
holding the front and rear rods. Opening
the cover from rear or front is applied in two
different steps. Open front side or rear side
or both sides until required level is reached to
obtain the required ventilation.
To close: Pull the cover down by holding the
rod tightly.
Power Roof Flap
Power roof is controlled by a control switch
located in the centre console.
54
OPERATION
Cab Ventilation
Power roof moves to opening or closing
direction while the opening/closing buttons are
pressed.
Operation is stopped automatically when the
power roof reaches uppermost or lowermost
position. Buttons are active while the ignition
is on.
Power roof is closed automatically when the
control switch is pressed once for a short
period while it is open.
Power roof is opened automatically when
the control switch is pressed once for a short
period while it is closed.
Air vent with diaphragms
Your cab has a ventilation feature by the vent
with 2 diaphragms on the back of the lower
bed.
4