Spark Arrester - Ford 1833 Series User Manual

Spark Arrester

Spark arrester shall be installed at
hazardous material loading, unloading
locations and fuel stations during fuel
filling or draining. When the vehicle is out
of the station, the spark arrester shall be
removed.
Put on a pair of gloves before installing
spark arrester as the muffler is hot.
Hook the spark arrestor from its clips to
the hangers in the muffler. Close the clips
and retain the spark arrestor to the
exhaust.
MAINTENANCE AND SERVICE
Put on a pair of gloves before removing
spark arrester as the muffler and spark
arrestor is hot.
The spark arrester is removed from the
exhaust pipe by loosening the brackets on
it.
Spark arrester shall be cleaned by water
jet to cleanse its pores after every 25
uses.
Urea system is sensitive to dirt, dust and
soil. During urea filling, ensure that dirt,
dust or contaminants do not go in the
urea tank.
155
Fuel Quality and Refueling
CAUTION
Various sensors and urea injector shall be
available on the exhaust muffler. (On Eu5
vehicles the urea injector is on the exhaust
pipe) When you wash your vehicle, do not
apply water jet on the urea injector on the
muffler, sensors and the electric
connections.
DOC, DPF and SCR catalyst are
available in the exhaust muffler. These
parts are ceramic-based bricks, and it is
definitely not allowed to wash these parts.
Do not attempt to wash inside the muffler
from the muffler outlet or from the injector
housing by removing the urea injector.
5