Warning System - TOHATSU MFS 9.9E Series Owner's Manual

30
PRE-OPERATING PREPARATIONS
ENOM00039-D

5. Warning system

If outboard motor encounters an abnor-
mal condition of fault, the warning buzzer
will emit a continuous beep or intermit-
tent short beeps and the warning lamp
will synchronize with the buzzer and
engine speed will be limited (engine will
not be stopped).
*No buzzer is located for tiler handle type
and EP type on the motor.
See next page for conditions which will
lead to an abnormal condition or fault.
6
ENOM00040-1
Location of warning buzzer and
lamp
Warning buzzer
RC model: Located inside the remote
control.
Tiller handle model: No warning buzzer.
Warning lamp
RC model: Located in the tachometer &
bottom cowl.
Tiller handle models:Located on the bot-
tom cowl.
ENON00009-A
Note
Warning lamp for optional tachometer will
synchronize with the warning lamp for
engine side.
1. Warning lamp
1. Warning lamp
1
ENOF00851-A
1
ENOF00314-A2