Advertisement
1 . Install Rocket and Cables
Route Ethernet cable through the hole on the
O
Antenna Bottom Cover
and connect to Ethernet port on the Rocket.
Attach the two antenna RF connectors to the Rocket.
2. Install Cover and Bushing
Install cover to the bottom of the antenna with the
0
M3X8 Tapping
Screw.
Wrap network cable in
0
Bushing then push it into place of cover.
3. Install Antenna Bracket Clamps
Install
9
Antenna U Bracket Clamps to the antenna brackets by installing:
0
M8X25 Bolt (Qty. 4)
0
MS Serrated Flange Nut (Qty. 4)
4. Attach Antenna to Pole
Mounting bracket can accommodate 030-75mm pole.
Install<:) Antenna V Bracket clamps by installing:
0
M12X180 Bolt (Qty. 2)
G
M12X130 Bolt (Qty. 2)
0
M12 Serrated Flange Nut (Qty. 8)
Secure each
Q
M12X18 Bolt using a
0
M12 Serrated Flange Nut
on the top
9
U Bracket.
i
Advertisement
