Operating Mode - SIM Tech SimCom SIM7100 Hardware Design

FLIGHTMODE, STATUS, USIM_DET, SD1_DET), I2C, UART, PCM, COEXn, BOOT_CFGn.
The operating temperature of SIM7100 is listed in the following table.
Table 32: Operating temperature
Parameter
Normal operation temperature
Extended operation temperature*
Storage temperature
*Note: Module is able to make and receive voice calls, data calls, SMS and make
GPRS/WCDMA/HSPA+/LTE traffic in -40℃ ~ +85℃. Temperatures outside of the range -30℃ ~ +80
℃ might slightly deviate from ETSI specifications.
5.3

Operating Mode

5.3.1 Operating Mode
The below table summarizes the various operating modes of SIM7100 series products.
Table 33: Operating mode
Mode Status
Sleep
Idle
Normal
Talk
operati
on
Standby
Data
transfer
SIM7100_Hardware Design_V1.01
Function
In this case, the current consumption of module will be
GSM/WCDMA
reduced to the minimal level.
/TD-SCDMA/EV
In sleep mode, the module can still receive paging
DO/LTE
message and SMS.
Software is active. Module is registered to the
GSM/WCDMA
/TD-SCDMA/EV GSM/WCDMA/TD-SCDMA/EVDO/LTE network, and
DO/LTE
the module is ready to communicate.
Connection between two subscribers is in progress. In this
GSM/WCDMA
case, the power consumption depends on network settings
/TD-SCDMA/EV
such as DTX off/on, FR/EFR/HR, hopping sequences,
DO
antenna.
Module is ready for
GPRS/EDGE/WC
GPRS/EDGE/WCDMA/TD-SCDMA/EVDO/LTE
DMA/TD-SCDM
data transfer, but no data is currently sent or received. In
A/EVDO/LTE
this case, power consumption depends on network
settings and EDGE/HSPA+ /LTE configuration.
There is
GPRS/EDGE/WC
GPRS/EDGE/WCDMA/TD-SCDMA/EVDO/LTE
DMA/TD-SCDM
A/EVDO/LTE
data transfer in progress. In this case, power consumption
is related to network settings (e.g. power control level);
Smart Machine Smart Decision
Min. Typ.
-30 25
-40 25
-45 25
57
Max. Unit
80
℃
85 ℃
+90
℃
2015-01-20