Hitachi Compute Blade Series Update Manual page 80

9. When the updated LP firmware version is displayed, make sure that the LP firmware
version for the Active Bank number matches the updated LP firmware version.
Thereafter, select [Q. Quit and Reboot] and press [Enter].
<< LP Maintenance Tool (Version X.X) >>
---- LP Firmware Information ----
Bank# Version
0 VV-RR(TT-KK)
1 VV-RR(TT-KK)
---- LP License Information ----
LP License [Advanced]
---- Menu ----
1. Update LP Firmware
2. Change LP F/W Active Bank
3. LP Model Upgrade
4. Show Verup License Key
5. Recover LP Configuration
Q. Quit and Reboot
Select : Q
10. Remove the LP firmware CD from CD/DVD drive connecting to the USB port at the
front panel of the server blade, and then disconnect the CD/DVD drive from the USB
port.
11. Type "Y" at the "Quit LP Maintenance Tool? (Y/[N])" prompt and press [Enter] for
rebooting the server blade. (Entering "N" revert the screen display to step 3.)
<< Quit and Reboot >>
Quit LP Maintenance Tool? (Y/[N]) : Y
In the event that the last step fails to reboot the server blade, take action according
to Section "Notes on Firmware Update by Using LP Maintenance Tool" of this Chapter.
The old LP firmware version may be displayed in Active bank on FV command of
management module and Web Console right after LP firmware version is updated.
(There is maximum five minutes time-lag to display the updated version.)
12. Resave the configuration.
Press [F9] key on LPAR manager screen.
LPAR manager time settings
After updating LPAR manager firmware, implement the LPAR manager time settings while
referring to "LPAR manager Initial Settings" of "CB2000 User's Guide" or "HVM Initial
Settings" of "CB320 User's Guide".
4-8 Static Version Upgrade/Revision Update by LP Maintenance Tool
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide
Select
Alternate
Active Make sure that the LP firmware version for the
Active Bank number matches the updated version.
Enter "Q"
Enter "Y"