Hitachi Compute Blade Series Update Manual page 33

Selecting source version-revision range of HVM firmware
Select the source version-revision range of HVM firmware according to the steps below.
1. On "Step 3: Select Target Version" page, ensure that the check box of the target model
(Hitachi Compute Blade 2000 in this example) is checked and the destination
version-revision (59-11 in this example) is displayed as a result of the previous step.
2. At the "From" list, select the beginning of source version-revision range for firmware
update (58-84 in this example). Check Target Range check box to specify range
(otherwise, only one source version-revision selected in the "From" list takes effect). At the
"To" list, select the end of source version-revision range for firmware update (58-84 in this
example). When done, click Next button to proceed to the next step.
Static Version Upgrade/Revision Update by LP Maintenance Tool
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide
2-19