Table of Contents
Advertisement
Configuration backup
It is recommended to save the configuration after upgrading or
updating LPAR manager, and before booting LPAR manager.
To backup the configuration makes it possible to change the LP
firmware bank and restore the previous firmware version, even if
some problem happened in upgrading or updating LP firmware.
The previous firmware version cannot be restored without the
backup file.
[When upgrading/ updating CB2000 firmware]
[When upgrading/ updating CB320 firmware]
(1)
Save the configuration
Save the configuration to management module.
Press [F9] key on LPAR manager screen.
(2)
Shut down server blade.
Press [Alt] +[r] to display a sub-window, select [Shut down] and press
[Enter].
(3)
Backup the Configuration
Backup the configuration saved in the management module to the
appropriate server.
Log in to a system Web console, and select [Settings]-[Backing up and
restoring the settings] on the menu, then the next screen appears. Select
the partition and click Save button to take the backup as follows.
Static Version Upgrade/Revision Update by LP Maintenance Tool
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide
3-9
Advertisement
Table of Contents
