Table of Contents
Advertisement
Configuration backup
It is recommended to save the configuration after upgrading or updating HVM, and
before booting HVM.
To backup the configuration makes it possible to change the HVM firmware bank
and restore the previous firmware version, even if some problem happened in
upgrading or updating HVM firmware. The previous firmware version cannot be
restored without the backup file.
[When upgrading/ updating CB2000 firmware 58-5X or earlier]
[When upgrading/ updating CB2000 firmware 78-5X or earlier]
[When upgrading/ updating CB320 firmware 17-5X or earlier]
(1) Save the configuration
Save the configuration to management module.
Press [F9] key on HVM screen.
(2) Shut down the server blade.
Press [Alt] +[r] to display a sub-window, select [Shut down] and press [Enter].
Perform the procedures (3)-(5) in [When upgrading/ updating CB2000 firmware 58-6X
or later]
Static Version Upgrade/Revision Update by LP Maintenance Tool
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide
2-31
Advertisement
Table of Contents
