Hitachi Compute Blade Series Update Manual page 50

(d) Click OK button.
(3) Backup the Configuration.
Backup the configuration saved in the management module to the appropriate
server.
Log in to a system Web console, and select [Settings]-[Backing up and restoring
the settings] on the menu, then the next screen appears. Select the partition and
click Save button to take the backup as follows.
(4) Boot LPAR manager
Power the server blade on, in order to boot LPAR manager.
Select [Operation] tab, and select appropriate partition in
"The list of physical partitions". Select [Operation]-[Power supply module],
click [Operation]
When using CB320, use "Power operation" from "Server operation" tab.
2-36 Dynamic Version Upgrade / Revision Update by HVM Navigator
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide