CAUTION
Select suitable products for all applications. Do not exceed the capabilities of the motor spindle or tools.
⑥
Carefully direct coolant spray to the tool. Do not spray directly on the motor spindle body.
⑦
Stop working immediately when abnormal rotation or unusual vibration are observed. Afterwards, please check the
⑧
content of section 13. " TROUBLESHOOTING ".
⑨
Always check if the tool, collet or collet nut are damaged before and after operating.
If the collet or collet nut show signs of wear or damage, replace them before a malfunction or additional damage occurs.
⑩
After installation, repair, initial operation, or long periods of non operation, please refer to section 11. " BREAK-
⑪
IN PROCEDURE " detailed in Table 4. When checking the motor spindle, no vibration or unusual sound should be
observed during rotation.
Do not disassemble, modify or attempt to repair this motor spindle. Additional damage will occur to the internal
⑫
components. Service must be performed by NSK NAKANISHI or an authorized service center.
When using this motor spindle for mass production, please purchase the another motor spindle as a spare in case
⑬
of an emergency.
2
BASIC PACKAGE
.
When opening the package, check if it includes all items listed in " Table. 1 Packing List Contents ".
In the event of any shortage, please contact either NAKANISHI (see the " 4. CONTACT US " section) or your local dealer.
49