9 - 1 - 2 Connection of the Motor Cord <EMCD-BM 3 S-
The following instructions are for the spindles listed below only:
(BMJ- 319 / BMF- 319 / BMJ- 320 / BMF- 320 / BMJ- 322 / BMF- 322 / BMJ- 325 / BMF- 325
① Remove the Protective Cover of the Motor Cord.
② Ensure alignment pin on the motor is positioned downward. Carefully insert the alignment pin on the motor cord into the alignment
hole and push straight into the motor connector.
72
Protective Cover
Removal
Alignment Pin
Motor Spindle Side
M / EMCD-BM 3 A- □ M>
□
Fig. 30
Alignment Hole
Motor Cord Side
Fig. 31