③ Tighten the Motor Cord Nut.
9 - 2 Air Supply
The air pressure requirement varies with the number of the motor connections and the length of the hose (quick disconnect cord and
motor cord). Verify the number of spindles and cable length before setting the pressure according to Table 1.
CAUTION
For BM-319 / BM-319C / BM-319F / BM-319FC / BM-320 / BM-320F / BM-322 / BM-322FR / BM-322FL / BM-322FS / BM-325
・
"Hose Length" indicates total hose length consisting of the Quick Disconnect Hose and the motor cord hose. See
Fig 32 to see how to calculate "Hose Length".
When connecting the two motor spindles to the Controller, use the air hose branching joint provided (" Y " Type)
・
provided with the CONTROLLER. Insert the branching joint into the Air Out quick disconnect on the CONTROLLER.
(Common for all motor spindle models.)
Motor Spindle
Tighten
Motor Spindle Side
Fig. 32
Motor Cord Nut
Motor Cord Side
73