<Option>
・ Spacer (10mm)
By using this spacer between the back of the flange and the
front the machine's tool block, it is possible to extend the
cutting tool edge forward 10mm (For BM-322FR, BM-322FL
and BMF-322).
SP- 22 × 10L
Model
・ Split Bushings
Bushings allow a φ 22mm BM-322, BMJ-322, BM-322FR, BM-322FL,
BM-322FS and BMF-322 to be mounted into larger diameters. φ
25mm or φ 25.4mm holders.
Model
RB- 22 × 25 × 34L
RB- 22 × 25.4 × 34L
Inside diameter
Outside diameter
φ22mm
φ25mm
φ22mm
φ25.4mm
Fig. 43
Fig. 44
83