Table of Contents
Advertisement
5.
Replace the riser card cover panel and affix in place using screws (circled in red
in the image below).
2.3
Mounting the System
Warning! When mounting the panel PC, more than one person should perform the
installation to prevent accidental damage to the panel or personal injury.
Le comité constate qu'el-nasr " mounting, Plus d'une personne installa-
tion to prevent the cadre accidental damage to the personal injury.
The panel PC supports various mounting options, as listed below.
Wall mounting
Panel mounting
Arm mounting
Stand mounting
2.3.1
Wall Mounting
To mount the panel PC onto a wall, follow the instructions below (see Figure 2.4 for
additional detail).
1.
Select the location on the wall for the wall mount plate.
2.
Mark the location of the two plate screw holes on the wall.
3.
Drill two pilot holes into the wall at the marked locations.
4.
Align the wall mount plate screw holes with the pilot holes.
5.
Secure the mount plate to the wall by inserting screws into the two pilot holes
and tightening them.
PPC-6121 User Manual
24
Advertisement
Table of Contents
