Cisco ONS 15600 Installation Instructions Manual page 6

NTP- E3 Open and Remove the Front Door
NTP-E3 Open and Remove the Front Door
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note The ONS 15600 has an ESD plug input and is shipped with an ESD wrist strap. One ESD plug input is
located on the outside edge of the shelf on the left-hand side, and the other is located at the bottom rear
of the shelf. It is labeled "ESD." Always wear an ESD wrist strap and connect the strap to the ESD plug
when working on the ONS 15600.
Locate the latches on the bottom left and right sides of the door
Step 1
Cisco ONS 15600 Procedure Guide, R7.0
1-6
This procedure explains how to open and remove the front door to access
the ONS 15600 shelf, including the card cage area and fan trays.
None
NTP-E2 Install the Bay Assembly, page 1-5
Required
Onsite
None
Chapter 1 Install the Bay and Backplane Connections
(Figure 1-1).
78-17203-01