Cisco ONS 15600 Installation Instructions Manual page 2

Required Tools and Equipment
This unit must be installed in a rack that is secured to the building structure. Statement 205
Warning
Required Tools and Equipment
You will need the following tools and equipment to install and test the ONS 15600.
Included Materials
The ONS 15600 bay ship kit is shipped with the ONS 15600. The under-floor power kit is an optional
item and is used in environments where power is supplied through the floor, rather than overhead. You
can also order installation dollies to help you with unloading the bay from the shipping pallet; for
information on obtaining the dollies, contact your Cisco sales engineer.
The number in parentheses gives the part number or the quantity of the item included in the package.
•
•
•
•
•
Cisco ONS 15600 Procedure Guide, R7.0
1-2
Bay ship kit (53-2141-XX)
Bay label
–
Floor template
–
ESD ground strap
–
– Rectangular seismic washers (4)
– Cisco Optical Transport Products Safety and Compliance Information
Under-floor power kit (800-23062-XX) (optional)
Screws and washers, #8 x 0.75 inch (12)
–
Screws and washers, #8 x 0.375 inch (8)
–
Power conduits (2)
–
Cable strain-relief brackets (2)
–
Wide CRM kit (53-2181-XX) (optional)
Latch catches (2 left and 2 right)
–
Velcro tie-wrap (26)
–
Wide CRMs (2; left and right)
–
6-32 panhead screws (8; for latch catches)
–
8-32 panhead screws (10; for wide CRMs)
–
Narrow CRM kit (53-2193-01) (optional)
– Fiber radiuses (2; left and right)
– Narrow CRMs (2; left and right)
– 6-32 panhead screws (4; for fiber radiuses)
8-32 panhead screws (6; for narrow CRMs)
–
900-mm kick plate kit (53-2178-01) (optional)
Front kick plate
–
Chapter 1 Install the Bay and Backplane Connections
78-17203-01