Filling The 2-In-1 Water Tank - Bissell CLEANVIEW ESSENTIAL 20095 Instructions Manual

Filling the 2-in-1 Water Tank

More of a visual person? We've got video instructions for this step at support.BISSELL.com.
Note: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. Do not
use boiling water. Do not heat water or tank in microwave.
1.
Use Tank Carry Handle to
remove tank from the machine
and bring it to the sink.
4.
Fill tank with hand hot
(60°C/140°F MAX) tap water
to the water fill line. Do not
boil or microwave water as it
can destroy the tank.
7.
Replace the tank lid and
latch.
2.
Pull up on the bottom edge
of the latch on the tank to
remove the lid.
5.
Fill the provided measuring
cup with formula to the fill line
and pour into the bladder.
Optional: Add 60ml of OXY
Boost per 3.7L of water and
carpet cleaning formula
solution. For optimal results,
use 74ml (1 capful) per
3.7L of water and carpet
cleaning formula solution. The
CleanView™ Essential has a
3.7L Tank.
8.
Place tank into machine
base and seat firmly into place.
3.
Pull up on bladder fill cover
that says "Fill Here".
6.
Push down on bladder fill
cover to close.
global.BISSELL.com 5