Emptying The 2-In-1 Water Tank; After-Cleaning Care - Bissell CLEANVIEW ESSENTIAL 20095 Instructions Manual

Emptying the 2-in-1 Water Tank

More of a video person? We've got you covered. Find these steps, and other how-to videos, at
support.BISSELL.com.
1.
Turn machine OFF and
remove the 2-in-1 Water Tank
from the machine. Carry tank
to a sink or outside to dispose
of dirty water.
4.
Rinse the tank with running,
hand hot (60°C/140°F MAX)
tap water, taking care to clean
underneath and around heavy
duty bladder.

After-Cleaning Care

For a full list of machine maintenance tips and tricks, visit support.BISSELL.com.
Cleaning with the HydroRinse
1.
Attach the HyrdoRinse tool
to the hose. Turn the ready
tools dial to tools and turn the
machine ON.
WARNING
outlet before performing maintenance or troubleshooting checks.
2.
Pull up on the bottom edge
of the latch on the tank to
remove the lid.
5.
After each use, remove
any debris trapped in red lint
screen on base of machine
while tank is still removed.
Tool
™
2.
Hold the hose and tool in
an upright position. Hold down
the trigger to rinse the hose
for 30 seconds.
To reduce the risk of electric shock, push power pedal OFF and disconnect plug from electrical
3.
Empty dirty water from
back corner of tank.
6.
Return 2-in-1 Water Tank to
machine.
global.BISSELL.com 9