What's In The Box; Assembly - Bissell CLEANVIEW ESSENTIAL 20095 Instructions Manual

What's in the Box?

Standard accessories may vary by model. To identify what should be included with your purchase,
please refer to the "Carton Contents" list located on the carton top flap.
Base
Tough Stain Tool

Assembly

Go to support.BISSELL.com for assembly videos.
1.
Slide Upper Handle onto
lower base and secure with
two long screws (taped to
Upper Handle) into marked
holes.
4.
Wrap hose around both
hose/cable racks. Secure it by
inserting the trigger hose grip
into opening on the grip holder
on the upper hose/cable rack.
Handle
2-in-1 Crevice Tool
2.
Attach upper hose/cable
rack to the back of the handle
by inserting hook into the
slot and pressing up until it's
seated flush with the back of
the machine. Use 1 short screw
to secure the bottom of the
rack to the machine.
5.
Wrap cable around lower
and upper hose/cable racks.
Secure plug to cable with clip
on plug.
Screws
Deep Stain Tool HydroRinse™ Tool
Tool Holders Bare Floor Tool
Required for Assembly
Phillips-head Screwdriver
3.
Attach lower hose/cable
rack by inserting the hook into
the slot and pressing up until
it's seated flush with the back
of the machine. Use 2 short
screws to secure the bottom
hose/cable rack.
6.
Attach included tools to the
appropriate storage locations
on the machine.
global.BISSELL.com 3