Cleaning And Maintenance; Storage; Dismantling And Utilization - Sonel CMP-200 User Manual

Hide thumbs Also See for CMP-200:
Table of Contents

Advertisement

Available languages

Available languages

In order to replace the battery it is necessary to do the following:
place rotational selector in the position OFF and remove the
one rear Phillips head screw,
open the battery compartment and replace the required two
1.5 V AAA batteries,
re-assemble the tester.

7 Cleaning and maintenance

The casing of the tester may be cleaned with a soft, damp cloth
using all-purpose detergents. Do not use any solvents or cleaning
agents which might scratch the casing (powders, pastes, etc.).
The electronic system of the tester does not require maintenance.
8

Storage

In the case of storage of the device, the following recommenda-
tions must be observed:
Make sure the tester and its accessories are dry,
In the case the tester is to be stored for a prolonged period of
time, the battery must be removed from the device.

9 Dismantling and utilization

Worn-out electric and electronic equipment should be gathered
selectively, i.e. it must not be placed with waste of another kind.
Worn-out electronic equipment should be sent to a collection
point in accordance with the law of worn-out electric and electronic
equipment.
Before the equipment is sent to a collection point, do not dis-
mantle any elements.
Observe the local regulations concerning disposal of packages,
worn-out batteries and accumulators.
26
CMP-200 – USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CMP-200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents