Keithley 7011-S Instruction Manual page 7

7011SPECIFICATIONS
MOD", 'IOU-S Quad 1x10 Multiplew with SaewT.smh&.
MODEL7011-C QuadlxlOMvltiplexerwithMT~~Connector.
MDLTIPLBX CONPIGDRATION Four independent 1x10 2-p& Multi-
plex banks or two independent 1x10 &pole Multiplex banks. Adjjcent
banksenbecomfftedtogether. Jumperscanberemovedtoisolateany
bank from the backplane.
CONTACT CONFIGDRATION: 2-jmle Form A @Ii, Lo).
CONNECTOR TYPE:
7011-5: Screw terminal, #16AWG IMximllm wire size, with a92 tnch
O.D. 28 Conductors
with .062 inch O.D.
maxima
#Z?AWG
typical wire size
30 Conductor madmum
mmc
%-pin m&Ewxardconnebor. Mates tofem&twistedwire
cable, crimp or solder connedor.
MAXMUM SIGNAL LEVEb
DC Sign& 1lOV DC behveen any two pins, IA witched.
3WA
bG.eive load).
AC Sign& 125V FM5 or 173V AC peak, between any two pins,
1A switched, 60VA ke&tive load).
COMMON MODE VOLTAGE: 175" peak, my pin to chassis.
CONTACTLIFE
CONTACT POTENTIAL
7011-5: c 500 nv per contact pair Hi, Lo).
< 1.5 pv par single contact
m11-c < 1.5 WV per contact pair m, Lo) eypically < 1 @q.
< 35 p? per single contact oj@zdly c 3 PVL
OPFSET 'XItRt3iVI: < 100 PA.
ACTUATION TIME: 3 ms.
ISOLATION:
Bank >lC@Q < 25 pF.
CbanneI to channel: >lO%Z, < 50 pF.
Differenti Configured as 1x10 =-l@Q, < 100 pF.
Configured as 1x40 >loSQ, < 200 pF.
Common Mode Configured as 1x10 >lOQ, < 2W pF.
Conftgurect as 1x40 >l@O, < 600 pF.
CROSS TALK OMHz, 500 Load):
Bank <-4OdB.
Channeb <4OdB.
INSERTION LOSS (MS2 Somx,sO Load): < 0.1 dB below 1 MHz, < 3 dB
below 2 MHZ.
RELAYDRNECURRENT (per r&y): 16 mA.
E7WIRONMEN-C
opdi0~ O'C to WC, up to 35-x < 80% Fx.
smagez
-25°C to 65'C
spedfieti0ns subjj to change without notice.