Channel Assignments - Keithley 7011-S Instruction Manual

4.3.1 Channel assignments
The Model 7001 has a cbamel status display (Figure 4
1) that provides the real-time state of each available
channel. The left portion of the display is for slot 1
(Card I), and the ri&t portion is for slot 2 (Card 2).
Multiplexer organization of the channel status display
for each slot is shown in Figure 4-2. The card contains
40 channels and is made up of four banks (Bank A, B,
C, and D) of 10 multiplexer inputs as shown in the il-
1UStiatiOII.
To control the multiplexer (mux) card from the main-
frame, each multiplexer input must have a unique
CHANNEL assignment which includes the slot num-
her that the card is installed in. The CHANNE L assign-
ments for the multiplexer card are provided in Figure
4-3.
Each CHANNEL assignment is made up of the slot
designator (1 or 2.) and the multiplexer channel. To be
consistent with Model 7001 operation, the slot designa-
tor and nwx input are separated by exclamation points
(!). Some examples of CHANNEL assignments are as
follows:
CHANNEL l!l = Slot 1, Cbamel 1 (Input 1 of Bank A)
CHANNEL 1!40 = Slot 1, Channel 40 (Input 10 of Bank
D)
CHANNEL 2!23 = Slot 2, Channel 23 (Input 3 of Bank
C)
CHANNEL 2!36 = Slot 2, Input 36 (Lnput 6 of Bank D)
7001 Display
CARD 1 CARD 2
4-2