Configure Ipv6 Lan Settings; Configure The Radvd Address Type - TP-Link TL-WR850N User Manual

Chapter 10
when it accesses the DHCP server. If there are some devices in the LAN that require
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
Follow the steps below to reserve an IP address for your devices.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
3. Scroll down to the
reservation entry for your device.
4. Enter the MAC Address
5. Specify the IP address which will be reserved by the router.
6. Select the Enable This Entry

10. 2. Configure IPv6 LAN Settings

Based on the IPv6 protocol, the router provides two ways to assign IPv6 LAN addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type

10. 2. 1. Configure the RADVD Address Type

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
3. Select IPv6 to configure IPv6 LAN parameters.
> Network > LAN Settings
Address Reservation
of the device for which you want to reserve IP address.
check box and click
> Network > LAN Settings.
Customize Your Network Settings
page, and select IPv4.
section, and click Add
Save to make the settings effective.
to add an address
52