General Copying Features; Selecting Colour; Reducing/Enlarging - Canon imageRUNNER ADV Colour Copy Manual

Table of Contents

3 General Copying Features

3.1

Press the Select Colour button on the main copier screen to select the mode for colour copying.

3.2

You can select the machine to adjust the copy zoom ratio automatically, or you can specify the copy zoom ratio.

1. Press the Copy Ratio button on the main copier screen for Reducing/Enlarging.

2. You have pre-set enlarging on the right hand side and pre-set reduction on the left hand side. If you have an A4

original and you would like to enlarge to A3 please make sure your original is placed in the document feeder in

the Landscape direction (A4R) and push the slide guides in to fit. If using the platen glass please place face

down, again in the A4R direction.

3. Make you selection i.e. A4 to A3

Press ok and the green start button to make a copy.

Page 8 of 54

Auto (Colour/Black) - If your documents have mixed black and white

and colour pages using Auto will automatically detect the colour pages

and produce using the colour toners and the black and white pages will

be produced just using the black toner only.

Full Colour - If you have a document with mixed black and white and

colour pages all pages will be produced using the colour toners. Not

cost effective as the black and white pages will be produced using the

colour toners.

Black - All pages will be produced in black and white.

Single Colour - All pages will be produced using one single colour

Imagerunner ADVANCE Colour Copy Guide G3.Docx G3

Table of Contents