Saving Current Configuration To Flash Memory Manually Using Edm - Avaya ERS 3500 Series Fundamentals

6. In Action, select dnldConfig.
7. On the toolbar, click Apply.
Config Image Diag file tab field descriptions
The following table describes the fields on the Config/Image/Diag file tab.
Name
TftpServerInetAddressType
TftpServerInetAddress
BinaryConfigFilename
Action

Saving current configuration to flash memory manually using EDM

Use this procedure to save the current configuration to flash memory manually.
Procedure
1. In the navigation tree, double-click Edit to open the Edit tree.
2. Double-click File System.
3. Choose Save Configuration.
Fundamentals of ERS 3500 Series
Enterprise Device Manager configuration files
Description
Specifies the IP version of the TFTP server
address.
Specifies the TFTP server IP address.
Specifies the name of the binary
configuration file.
• dnldConfig—Downloads a configuration
file to the switch.
• upldConfig—Uploads a configuration file to
the switch from a designated location.
• dnldImg—Downloads a new software
image to the switch.
• dnldImgIfNewer—Downloads a new
software image to the switch only it if is
newer than the current image.
• dnldImgNoReset—Downloads a new
software image to the switch without a
switch reset.
• dnldFW—Downloads a new diagnostic
software image to the switch.
• dnldFwNoReset—Downloads a new
diagnostic software image to the switch
without a switch reset.
March 2014 55