Related Manuals for Qtx HIPAR-100
Summary of Contents for Qtx HIPAR-100
- Page 1 HIPAR-100 OUTDOOR LED PAR CAN RGBWA Item ref: 154.323UK User Manual Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Introduction Thank you for your purchase of the QTX HIPAR-100 outdoor LED PAR light. This fixture has been designed to provide powerful and colourful light coverage to a wide area for indoor or outdoor areas Please read and keep this manual for reference to gain the best results from this product and avoid damage through misuse.
-
Page 3: Rear Panel
Rear panel Installation The HIPAR-100 is supplied with a dual hanging bracket, which can also be used as a free-standing support. When installing the fixture, ensure all fixings are secure, controls and connections are accessible and allow enough space for air to circulate around the housing. Do not aim directly in line of sight or very close to people where the extremely bright output of the fixture may be harmful to eyesight. -
Page 4: Stand-Alone Operation
(the XLR plug is not a waterproof connector) The HIPAR-100 has either 5 or 9 DMX channels as described in the tables on the following pages. Set the DMX value to the required start address via the control panel and this will become the DMX address of channel 1. - Page 5 To select the DMX channel mode, step through the onboard menu to and press ENTER to select either for 5-channel mode or for 9-channel mode. DMX Channels – 5 Channel Mode Ch.1 000 - 255 Red level 0-100% Ch.2 000 - 255 Green level 0-100% Ch.3...
-
Page 6: Specifications
Specifications Power supply 110-240Vac, 50/60Hz IP rating IP65 Modes Auto, sound-activated, master/slave, DMX512 Connections Power in, power out, DMX in, DMX out Power consumption max. 100W LED: quantity LED: type 15W RGBWA (5-in-1) DMX channels 5 or 9 Beam angle 45°...