Related Manuals for Qtx HIPAR-120
Summary of Contents for Qtx HIPAR-120
- Page 1 HIPAR-120 OUTDOOR LED PAR CAN RGBW Item ref: 154.324UK User Manual Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Introduction Thank you for your purchase of the QTX HIPAR-120 outdoor LED PAR light. This fixture has been designed to provide powerful and colourful light coverage to a wide area for indoor or outdoor areas Please read and keep this manual for reference to gain the best results from this product and avoid damage through misuse.
-
Page 3: Rear Panel
Rear panel Installation The HIPAR-120 is supplied with a dual hanging bracket, which can also be used as a free-standing support. When installing the fixture, ensure all fixings are secure, controls and connections are accessible and allow enough space for air to circulate around the housing. Do not aim directly in line of sight or very close to people where the extremely bright output of the fixture may be harmful to eyesight. -
Page 4: Stand-Alone Operation
Auto, sound-activated, strobe and manual colour modes described above will operate without DMX control. To control further HIPAR cans in master-slave mode, connect the DMX through from a master HIPAR-120 in standalone mode to the DMX input of a “slave” HIPAR can that is set to DMX mode with address . -
Page 5: Dmx Operation
(the XLR plug is not a waterproof connector) The HIPAR-120 has 8 DMX channels as described in the table below. Set the DMX value to the appropriate start address via the control panel and this will become the DMX address of channel 1. -
Page 6: Specifications
Specifications Power supply 110-240Vac, 50/60Hz IP rating IP65 Modes Auto, sound-activated, master/slave, DMX512 Connections Power in, power out, DMX in, DMX out Power consumption max. 120W LED : quantity LED : type 10W RGBW (4-in-1) DMX channels Beam angle 25° Dimensions 275 x 225 x 218mm Weight...