Connecting The Inverter To Your Wi-Fi (Apple Ios Devices, Redback App Installed) - Redback SH4600 Manual

Connecting the inverter to your Wi-Fi (Apple iOS devices, Redback app installed)

To reconnect the inverter, you need the following information:
Your home Wi-Fi network name No idea? Look on your router.
Your home Wi-Fi password No idea? Look on your router.
Step Procedure
1. Stand beside your inverter (to ensure
strong reception)
2. On your iOS device, open Settings.
Touch Wi-Fi (Figure 8-1). A list of Wi-
Fi networks will appear.
3. Select Redback_XX e.g. Redback_04.
If there is more than one Redback
listed, choose the one with strongest
reception.
Make a note of the Inverter number
(XX).
4. Enter password 12345678 and touch
Join. (8-3). Wait for the confirmation
message.
There is no need to close Settings.
5. Open the Redback App.
Redback Technologies
Audience: Home owner Installer .
Your inverter Wi-Fi identity XX
iOS
Figure 8-1
Your inverter serial number On the side of your inverter
Discover in Step 3, below.
Figure 8-2 Figure 8-3
GUI- 003 Knowledge Base- Resetting your Redback Inverter
Version 1.0 - 27/07/2018 - Page 11 of 16